Penn Audio · Custom

Any shape. Any finish. Any color.

Loudspeakers designed for one room — and solved before they are built.

Penn Audio Custom starts from your room, your program and your look. We draw the cabinet to the architecture, choose drivers from real manufacturer data, and solve the cabinet, crossover and waveguide together in the Penn Audio Speaker Lab. You see how it will sound, how loud it will go and what it will look like before a panel is cut.

Start a custom project See what we’ve built

Any shape

Straight out of the Speaker Lab.

Every cabinet below is a real Penn Audio design file, rendered by the Speaker Lab exactly as it is modeled and built — the same file that produces its response, its cut sheets and its crossover. Towers, columns, wedges, faceted arrays, horns, cardioids, monitors and subwoofers.

Three-module tower — Penn Audio Speaker Lab render — **Three-module tower.** Stepped modules, a curved staved back, a set-back tweeter pod. American walnut.

Slim worship column — Penn Audio Speaker Lab render — **Slim worship column.** Six inches wide, five feet tall, ten drivers with a shaped vertical pattern behind a cloth grille. Piano-gloss white.

Line-array element — Penn Audio Speaker Lab render — **Line-array element.** A splayed wedge with damped rear vents for cardioid low end. Black vinyl.

Faceted array cabinet — Penn Audio Speaker Lab render — **Faceted array cabinet.** Polyhedral walls drawn panel by panel, folded lines inside. Black powder coat.

Passive cardioid — Penn Audio Speaker Lab render — **Passive cardioid.** Rear rejection built into the box — no extra amplifier channel. Blue levant vinyl.

Single-horn point source — Penn Audio Speaker Lab render — **Single-horn point source.** One horn, three bands, one wavefront. Carbon fiber.

Six-way line source — Penn Audio Speaker Lab render — **Six-way line source.** Stacked cardioid line source. Natural oak.

Transmission-line monitor — Penn Audio Speaker Lab render — **Transmission-line monitor.** Quarter-wave line behind an 8-inch woofer. Rosewood.

MTM point source — Penn Audio Speaker Lab render — **MTM point source.** Dual 8-inch around a printed waveguide. Brushed aluminum with a black baffle.

Compact full-range — Penn Audio Speaker Lab render — **Compact full-range.** One driver, no crossover. Baltic birch.

Dual-21 subwoofer — Penn Audio Speaker Lab render — **Dual-21 subwoofer.** Floor-slot vent, flat to 30 Hz. Grey carpet.

Any finish · any color

One cabinet, sixteen finishes — and any color you name.

The same Install Line IL6, rendered by the Speaker Lab in each finish of our standard library: vinyls, carpets, powder coat, piano gloss, real-wood veneers, Baltic birch, brushed aluminum and carbon fiber. Paint matches to any RAL or Pantone reference, baffles and grilles can contrast, and a finish can change face by face.

Blue levant vinyl finish — Blue levant vinyl

Black powder coat finish — Black powder coat

Piano-gloss black finish — Piano-gloss black

Piano-gloss white finish — Piano-gloss white

Natural oak veneer finish — Natural oak veneer

American walnut veneer finish — American walnut veneer

Rosewood veneer finish — Rosewood veneer

Raw MDF (for paint) finish — Raw MDF (for paint)

Brushed aluminum finish — Brushed aluminum

What custom means here

Designed, not adapted.

Your shape

Wedges, columns, stepped towers, faceted and curved cabinets, slim wall profiles. The acoustics are solved for that exact shape — braces, ports and waveguide included.

Your coverage

Waveguides printed to the pattern your seating needs, and passive cardioid cabinets that keep sound off the stage without an extra amplifier channel.

Your finish

Any swatch from our library, any paint color, contrasting baffles, felt-dressed fronts, custom grilles and connector plates laid out to match.

How it works

From survey to commissioned system.

01 — Survey & brief

The room, the seating, the program, the look and the budget.

02 — Design in the Speaker Lab

Drivers from real manufacturer data; cabinet, crossover and waveguide solved together; every part checked against every wall.

03 — Review

You see the modeled response, coverage, output limits and the rendered cabinet in your finish. Changes here cost nothing.

04 — Build & commission

Panels cut from the Speaker Lab drawings, waveguides printed, crossovers built to the schematic — then installed and tuned by our team.

What you receive

The speaker, and the proof.

The finished loudspeakers, a datasheet generated from their design (each figure labeled modeled, declared or measured), the construction set — drawings, cut list and crossover schematic — and installation, tuning and support through The Penn Group.

Good fits

Where custom pays off.

Houses of worship that need intelligible speech from a speaker that disappears. Venues with coverage problems a catalog box can’t solve. Studios and listening rooms. High-end residential and architectural work. Integrators who need a product that doesn’t exist yet.

Penn Audio Custom

Tell us about the room.

Send dimensions, photos and what the system needs to do — and the finish you have in mind.

Start a custom project sales@thepenn.group